Our team of Notifier consultants are ready to provide you with our fire alarm expertise, contact us now. Extensive list of powerful features, the FireWarden-50 pro-grams just like FireWarden-100 products, yet fits into applica-tions previously served only by conventional panels. The FireWarden-50’s integral DACT transmits system status (alarms, troubles, AC loss, etc.) to a Central Station via the public switched telephone network. FireWarden-100-2(E) Rev 3. General The Notifier FireWarden-100-2 Rev 3 (NFW2-100) with Version 5.0 firmware is a combination FACP (Fire Alarm Control Panel. View and Download Notifier FireWarden-100-2 operating instructions online. Fire Alarm Control Panel. FireWarden-100-2 Control Panel pdf manual download. Also for: Firewarden-100-2e.
Advertising
DN-6995:C • 12/07/2011 — Page 1 of 2
NP-100(A) Series
Addressable Photoelectric Detectors
for the FireWarden Series
for the FireWarden Series
Addressable
DN-6995:C • A1-320
General
The
NP-100(A), NP-100T(A) and NP-100R(A) addressable,
low-profile plug-in photoelectric detectors use a state-of-the-
art photoelectric sensing chamber with communications to
provide open area protection and are used exclusively with
NOTIFIER’s
This 1973 – 1974 Suzuki TS100 and TC100 Parts Manual is a comprehensive parts book that shows you every component and part number. Great for ordering parts and understanding how it all goes together. Covers 1973 – 1974 Suzuki TS100K, TS100L, TC100K, TC100L models. This is a reproduction of the original, out of print, book. View and download Ts100 manuals for free. TS100 instructions manual. Owners manual toyota solara.
FireWarden Series (FireWarden-100-2 and Fire-
Warden-50) and
Spartan (NSP-25) Addressable Fire Alarm
Control Panels (FACPs). The
NP-100T(A) adds thermal sen-
sors that will alarm at a fixed temperature of 135°F (57°C).
Since these detectors are addressable, they will help emer-
gency personnel quickly locate a fire during its early stages,
potentially saving precious rescue time while also reducing
property damage. Two LEDs on each sensor light to provide a
local, visible sensor indication. Remote LED annunciator capa-
bility is available as an optional accessory, PN RA100Z(A).
The
NP-100R(A) is a remote test capable detector for use with
DNR(A)/DNRW duct smoke detector housings.
Features
SLC loop
• Two-wire loop connection.
• Unit uses base for wiring.
Addressing
• Addressable by device.
• Rotary, decimal addressing: 01 – 99 with FireWarden-100-2
• Two-wire loop connection.
• Unit uses base for wiring.
Addressing
• Addressable by device.
• Rotary, decimal addressing: 01 – 99 with FireWarden-100-2
and NSP-25, and 01 – 50 with FireWarden-50.
Architecture
• Unique single-source, dual-chamber design to respond
• Unique single-source, dual-chamber design to respond
quickly and dependably to a broad range of fires.
• Sleek, low-profile design.
• Integral communications and built-in type identification.
• Built-in tamper-resistant feature.
• Removable cover and insect-resistant screen for simple
• Integral communications and built-in type identification.
• Built-in tamper-resistant feature.
• Removable cover and insect-resistant screen for simple
field cleaning.
Operation
• Withstands air velocities up to 4,000 feet-per-minute (20 m/
• Withstands air velocities up to 4,000 feet-per-minute (20 m/
sec.) without triggering a false alarm.
• Factory preset at 1.5% nominal sensitivity for panel alarm
threshold level.
• Visible LED “blinks” when the unit is addressed (communi-
cating with the fire panel) and latches on in alarm.
Mechanicals
• Sealed against back pressure.
• Direct surface mounting or electrical box mounting.
• Mounts to: single-gang box, 3.5' (8.89 cm) or 4.0' (10.16
• Sealed against back pressure.
• Direct surface mounting or electrical box mounting.
• Mounts to: single-gang box, 3.5' (8.89 cm) or 4.0' (10.16
cm) octagonal box, or 4.0' (10.16 cm) square electrical box
(using a plaster ring — included).
(using a plaster ring — included).
Other system features
• Fully coated circuit boards and superior RF/transient pro-
• Fully coated circuit boards and superior RF/transient pro-
tection.
• 94-V0 plastic flammability rating.
• Low standby current.
Options
• Remote LED output connection, PN RA100Z(A).
• Low standby current.
Options
• Remote LED output connection, PN RA100Z(A).
Applications
Use photoelectric detectors in life-safety applications to pro-
vide a broad range of fire-sensing capability, especially where
smoldering fires are anticipated. Ionization detectors are often
better than photoelectric detectors at sensing fast, flaming
fires.
Construction
These detectors are constructed of off-white fire resistant plas-
Polycom soundpoint ip 560 user manual. tic. NP-100(A) series plug-in, low-profile smoke detectors are
designed to commercial standards and offer an attractive
appearance.
Installation
NP-100(A) series plug-in detectors use a detachable mounting
base to simplify installation, service and maintenance.
Mount base (all base types) on an electrical backbox which is
Mount base (all base types) on an electrical backbox which is
at least 1.5' (3.81 cm) deep. For a chart of compatible junction
boxes, see DN-60054.
NOTE: Because of the inherent supervision provided by the SLC
loop, end-of-line resistors are not required. Wiring “T-taps” or
branches are permitted for Style 4 (Class B) wiring. NP-100R(A)
mounts in a DNR(A)/DNRW duct detector housing.
loop, end-of-line resistors are not required. Wiring “T-taps” or
branches are permitted for Style 4 (Class B) wiring. NP-100R(A)
mounts in a DNR(A)/DNRW duct detector housing.
Operation
Each NP-100(A) series detector uses one of 99 possible
addresses on the FireWarden-100-2 and NSP-25, or one of 50
possible addresses on the FireWarden-50 Signaling Line Cir-
cuit (SLC). It responds to regular polls from the system and
reports its type and status.
The addressable photoelectric sensor in the NP-100(A) series
The addressable photoelectric sensor in the NP-100(A) series
has a unique unipolar chamberthat responds quickly and uni-
formly to a broad range of smoke conditions. It can withstand
wind gusts up to 4,000 feet-per-minute (20 m/sec.) without
sending an alarm level signal. Because of its unipolar cham-
ber, the NP-100(A) series is approximately two times more
responsive than most photoelectric sensors. This makes it a
more stable detector.
Flow 3d user manual free download. NP-100(A) in B210LP(A) Base
B
210
-2
Notifier Fire Warden 50 User Manual Download
9
51.j
pg
Notifier Fire Warden 50 User Manual Guide
Advertising
Popular Brands
Popular manuals